详细介绍
Compress running track is compacted by 8-9 mm SBR elastic layer and 4-5 mm EPDM surface. The construction technology is simple. But because the surface is too smooth, do not generally used.
Character:
1.the surface is very smooth, more suitable for outdoor courts.
2. Good elastic
EPDM granules could keep the good elastic even under the condition of low temperature.
3. Chemical stability
EPDM granules could be used for kinds of difficult weather condition, with chemical stability, ozone aging and thermal oxidative aging character.
![](/res/meetall-sports/pdres/202407/20240702194140752.jpg)
--Base Binder
Clean the ground, and brush the glue at the cement ground .
![](/res/meetall-sports/pdres/202407/20240702194140773.jpg)
--Flexible level installation points
Mix the binder with black granules by standard proportion, and mix the materials totally by mix machine.
Install the rubber floor by paving machine, keep the thickness around 8-9mm thick. All these work should be done before the base binder cured.
When finished the installation of paving machine, keep the rubber floor away from the damage. About 24 hours later, when it cured, the flexible level of rubber floor is finished.
![](/res/meetall-sports/pdres/202407/20240702194140792.jpg)
-- EPDM level installation points
Mix the binder with colored EPDM granules by standard proportion, and mix the materials totally by mix machine.
Install the rubber floor by paving machine, keep the thickness around 4-5mm thick. When finished the installation of paving machine, keep the rubber floor away from the damage. About 24 hours later, when it cured, the EPDM level of rubber floor is finished.